Hand Steadiness Tester


Introduction

The Hand Steadiness Tester is a game which tests the steadiness of your hand. The player has to take the ring from one end to another end without touching it to the wire. In this the player gets 4 turns. If the player touches the wire 4 times he has to reset the game & start the whole game from the beginning.
This project consists of IC 4017, a Buzzer, a Relay, some resistors, a Push button and 4 LEDs. There is also a PCB layout given. There are many types of Hand Steadiness Testers which are very simple. This New Hand Steadiness Tester is more advanced.
When the player touches the wire one time 1st LED turns on. When he touches 2nd time the 2nd LED turns on. When he touches 3rd time the 3rd LED turns on. When he touches 4th time the 4th LED turns on & the buzzer starts beeping. To stop the buzzer he has to push the reset button.

Schematic

Parts List

  1.     .      R1                     10K
  2.            R2 – R5             330 ohms         
  3.            D1 – D4            3v LEDs
  4.            IC1                    IC 4017        
  5.            SW1                  Push Button     
  6.            Buzzer 1             5v Buzzer    
  7.            RLY 1                5v Relay           
  8.         CN1                           2 Pin Connector  


PCB

This is a Single Sided PCB with no SMT components (Very easy to make & solder). This is made in     Express PCB.

Explanation

This is IC 4017. Q0 -Q3 are connected to LEDs through 330ohms resistors. Q3 is also connected to a buzzer & a relay. When we touch the wire with the ring, a positive current flows to pin 14.  When the player touches the wire 4 times, the relay gets on; this breaks the contact between the ring and pin 14 of IC. So after that the buzzer keeps beeping. When we push the reset button, the IC resets and the buzzer, the LED & the relay gets off.

How to make it

First you need a base for your Hand Steadiness Tester. You can use a wooden base or a cardboard box. You should paint it or cover it.Then you need a wire. You should use a thick wire. Or you can take 2 wires and twist them to make it thick.Then you need 2 thumb pins to attach the wire with the base.

  • Now attach the both the ends of the wire to the board with the thumb pins.
  • Now you have to shape the wire in the way you want.
  • After that you need to make a ring. You can make it by a wire or you can use a key ring

    .










  • Now you need to attach the circuit. Take a connector and attach one wire to the ring and the other wire to the thumb pin. 
  • Now you just have to attach the battery. You can use a power supply circuit to give it exact 5 volts. You can also use 4 1.2 volts rechargeable cells.
    Congratulations!! Your Advanced Hand Steadiness tester is ready.

    If it doesn’t work

        ·         Make sure that your connections are connected well.
        ·         Make sure that your PCB is fabricated well.
        ·         Make sure that batteries are working




Share your views...

6 Respones to "Hand Steadiness Tester "

Anonymous said...
February 27, 2013 at 7:45 AM

Um, um, blogging, composition, video qualification, LBC prove is Marvelous.
One in quint bloggers Write up updating of that religious doctrine is desperately needed today.
And partly, I knew I would omit Southward Beloit's lonesome forlornness, too do not need to overload your readers with more than posts each day than they can care. It was a second to your own Web log in the article footnote, allowing multitude who are impressed with your stake to chance out more.

Feel free to surf to my site :: click here

Anonymous said...
May 21, 2013 at 6:11 PM

Hi! I've been reading your weblog for a while now and finally got the bravery to go ahead and give you a shout out from Lubbock Texas! Just wanted to mention keep up the fantastic work!

my web page: tag formula 1 watches

Anonymous said...
May 27, 2013 at 11:32 PM

Kеep on workіng, gгeat ϳοb!


my hοmеpage :: unlocked htc titan 2

Anonymous said...
June 13, 2013 at 2:43 AM

Whаt a data of un-аmbіguіtу and prеѕeгѵеness οf
valuable knοw-how regarding unpгeԁicteԁ
emotions.

Τaκe a look аt my wеb blog;
savе herе digіtal сouponѕ ()

Anonymous said...
June 13, 2013 at 2:56 AM

Have you ѕeеn those pеople at checkout ωith tоns of
pгintаblе Chick fil a coupons
and wiѕheԁ that yοu simply could sаνe like them?
Τhis shοrt article can оffеr yοu the іnformаtion yοu should save
big buсkѕ on youг subsеquеnt shopping
tгіp.

Anonymous said...
June 13, 2013 at 4:34 AM

Clіpping tогrіd coupons codes might aρpеar like an old-fashiоned idea, but ѕаving funds
ought to in no way gо оut of stуle.
Couponѕ nonetheleѕs save on eveгy little thing from
gгοсeries to clοthes.
Makіng uѕе of ρrintable tοrrid couponѕ might hеlp you ѕavе a fаr bеtteг pricе.
Τhe under рost cοntainѕ sοme supеrb ideas
that cаn assіst you get eѕsentiаllу the most out of onе's coupon use.

Feel free to visit my webpage; torrid birthday coupon

Post a Comment

 

Receive all updates via Facebook. Just Click the Like Button Below...

Powered By AngoothaChaap

Followers

© 2013 World Of Information & Technology

Bloggerized By Shaher Yar # oopps-technology